Water Sheds Over Metal
Every attachment is flashed with an aluminum plate tucked beneath the shingle course above and sealed with an EPDM gasket — rain runs over metal, and no part of the water path relies on sealant alone.
Solar Panel Roof Mounts
Solar Panel Roof Mounts
Solaris SHINGLE
An all-aluminum asphalt shingle solar mounting system that flashes every roof attachment with metal and an EPDM gasket — water sheds over metal, not over sealant.
≤45°Roof Slope
0Design Wind Speed
0Product Warranty
0Design Life
Solaris SHINGLE
SEC.01
Overview
Asphalt shingle is the most common residential roof in North America, and the Solaris SHINGLE keeps mounting on it simple: an AL6005-T5 aluminum rail-and-clamp platform on flashed L-feet, fastened directly into the roof decking. Crews place attachments where the array layout needs them instead of hunting for rafters, carry light parts up the ladder, and cover both 3-tab and architectural shingles on roof slopes up to 45 degrees, in landscape or portrait.
Waterproofing is mechanical, not chemical. At every attachment point, an aluminum flashing plate slides up beneath the shingle course above, so rainwater sheds over the top of the metal and continues down the roof. Underneath, an EPDM rubber gasket closes the fastener penetration. Nothing in the water path depends on a bead of sealant staying elastic for decades — it is the same flashing principle roofers already trust around vents and skylights. Components come in silver as standard and can be color-matched to the roof, flashing included, so the finished array sits quietly on the shingles.
For distributors building a residential shingle roof offer, the Solaris SHINGLE is available two ways: under the Megawa name, or as an OEM/ODM line in your brand and packaging. Free sample kits put the flashing, rail, and clamps in your hands — and your installer customers' — before any volume commitment, and SGS or BV pre-shipment inspection can be arranged on request. Behind the hardware is an engineering team that has been building solar mounting since 2010, and every system carries a 12-year product warranty against a 25–30 year design life. Request a sample kit or start a distribution inquiry.
SEC.02
Key Advantages
No Rafter Hunting
L-feet fasten directly into the roof decking, so crews put attachments exactly where the layout needs them and keep the install moving with light, all-aluminum parts.
Disappears Into the Roof
Silver as standard, or color-matched components — flashing included — that keep the array low-profile and visually consistent with the shingles beneath it.
Your Brand or Ours
The full Solaris SHINGLE line is available as OEM/ODM — your label, your packaging, backed by our manufacturing and free sample kits.
SEC.03
Technical Specifications
| Material | AL6005-T5 Aluminum |
|---|---|
| Roofing Types | Asphalt Shingle Roofs (3-tab & Architectural) |
| Roof Slope | Up to 45° |
| Panel Orientation | Landscape / Portrait |
| Wind / Snow Load | Engineered to project |
|---|---|
| Attachment | Flashed L-feet, fastened into roof decking |
| Flashing Seal | Aluminum flashing with EPDM gasket |
| Design Codes | JIS C 8955 (JP) · ASCE/SEI 7 · IBC (US) · Eurocode EN 1991 (EU) |
SEC.04
Key Components
Rail
AL6005-T5 aluminum mounting rail that forms the structural backbone for panel attachment, carrying standard end and mid clamps across the shingle roof surface.
AL6005-T5
End, Mid Clamp
Universal aluminum clamps that secure modules to the rail — end clamps fix the outer edge of the array, mid clamps join adjacent panels, sized for a wide range of frame thicknesses.
AL6005-T5
L-Feet Kit with Watertight Flashing
L-shaped aluminum brackets that fasten into the decking beneath the shingle layer to transfer load into the roof structure, paired with an aluminum flashing plate and EPDM rubber seal that slides beneath the existing shingle course to seal each roof penetration against moisture. Color-matchable to the roof.
AL6005-T5 + EPDM
Representative components shown — full bill of materials available on request.
SEC.05
Frequently Asked Questions
Yes. Asphalt shingle roofs are the most common residential roofing type for solar, and the Solaris SHINGLE is built specifically for them. It works with both standard 3-tab and architectural (dimensional) shingles, using flashed L-feet that fasten into the roof decking beneath the shingle layer.
Each attachment point is flashed. An aluminum plate slides up beneath the shingle course above, so water sheds over the top of the metal and keeps running down the roof, and an EPDM rubber gasket closes the fastener penetration underneath. It is the same flashing principle used around vents and skylights — the water path runs over metal rather than depending on sealant.
Panels shade the shingles beneath them from direct UV, rain, and temperature swings, which can slow surface aging in the covered area. How much depends on climate and the roof's condition, so treat it as a side benefit rather than a reason to install — and always start from shingles in good condition.
The rail, clamps, L-feet, and flashing are all AL6005-T5 aluminum — light on the roof and corrosion-resistant without coatings — with an EPDM rubber gasket sealing each fastener. Both are proven outdoor materials, and they are what the 25–30 year design life and 12-year product warranty are built on.
Yes. Installation guides and drawings ship with the system, and Megawa's engineering team — building solar mounting since 2010 — can review layouts and site conditions on request. Structural documentation is available where a project requires it.
Yes. Free sample kits of the flashing, L-foot, rail, and clamps are available so you can evaluate the hardware before any volume commitment, and small first orders are supported. Contact us with your market and target volumes.
Yes. The Solaris SHINGLE line can be manufactured as OEM/ODM — your brand, your packaging, our production. Distributors use this to build a shingle roof offer of their own without setting up manufacturing.
Use the system built for it: the Solaris WAVE mounts on trapezoidal metal roofs, and the Apollo SEAM clamps onto standing seam roofs without penetrating them at all. Both share the same rail-and-clamp logic as the Solaris SHINGLE, so crews move between roof types with little retraining.
Request a Quote
Itemized BOM, unit pricing and lead time — engineering reply within 24 hours.
Quick quote: 30 seconds. Detailed RFQ: ~3 minutes, prefilled with this product.Or reach us via the Contact page